Page index

1. Optical Service creation
2. Site and Patch documentation
3. Add a missing port

...

NOCLook Cookbook

Don't be afraid to try these recipes out on nidev-consumer.nordu.net, if anything breaks it needs to get fixed.

Optical Service creation

The sequence for creating a new optical patch, seen from a documentation POI:

...

If the port is not documented at the time of link creation you can click the button labeled labelled Add port.

Obtain new Path ID (NU-4xxxxxx) and document the path

In the left menu click Create new and choose NORDUnet Optical Path from the following page.

• Fill out the form and click Save. You will be sent to the newly created path.
• Click Edit and on the following page:
• Set Provider to NORDUnet.
• Under Path depends on you can add

...

• the multiplex section this path depends on. Do not forget to add the OPS link(s) that the path depends on.
  (You should later be able to select more than one link at the time)
• Click Save.

Obtain a new Service ID (NU-Sxxxxxx) and document the service

In the left menu click Create new and choose NORDUnet Service from the following page.

• Fill out the form and click Save. You will be sent to the newly created Link.
• Click Edit and on the following page:
• Set Provider to NORDUnet.
• Set Customer and End User. Customer is the organization paying for the service, end user is the actual user that the NOC might be in contact with.
• Under Service depends on you can add the path and external service the service depends on.
  (You should later be able to select more than one dependency at the time)
• Click Save.

Site and Patch documentation

Creating a site

Start by creating a site if it does not already exist.

• In the left menu click Create new and choose Site
• Fill out the form and click Save. You will be sent to the newly created Site.

Creating racks

• In the left menu click Create new and choose Rack.
• Fill out the form and click Save. You will be sent to the newly created Rack.
  Racks should be named as they are named in the documentation you are reading from or using the site tile space standard (X.X).

Adding equipment to the racks

• Go to the equipment using the search bar or using the menu.
  • If the equipment does not exist add a new equipment.
• Click Edit and then click the Location area.
• Use the drop downs to navigate to the correct rack and click save. If an equipment spans more than one rack the lowest tile space should be used.
  It does not matter if the equipment already has a location set, a new location will replace it.

Creating patches

• In the left menu click Create new and choose NORDUnet Cable for cables with NORDUnet IDs or External Cable for other patches.
• Fill out the form and click Save. You will be sent to the newly created Cable.
• Click Edit and set the cables connections. You can set two at the time but that does not mean that the number of connections are limited to two. Just click save and continue and you can add more connections.

If the port you want to connect the cable to is missing you can click the button labelled Add port to open a new window where you can create a port.

Tip: If you have to create a lot of cables you can paste in the cable name after " class="external-link" rel="nofollow">https://ni.nordu.net/lu/cable name to save a few clicks per cable.

Adding new External Equipment or ODF

• In the left menu click Create new and choose External Equipment or ODF.
• Fill out the form and click Save. You will be sent to the newly created equipment.
• Click Edit and set the location.
• If you like you can add all the ports you need by clicking the Ports area. If you do this you will have to set the port type for all the ports after saving the equipment.
• Click Save.

Add a missing port

Make sure that the equipment you want to add a port to is the last selected thing in the drop down list, see image below.

...